|
|
Microspheres
BioMag Binding Proteins
(Biotin, Binding Protein A, Binding Protein G &
Streptavidin),
BioMag Dextran-Coated Charcoal, BioMag
Magnetic Immobilization Starter Kit, BioMag Magnetic Separators (12 x
75mm Test Tube Separator, 15ml/50ml Tube Separator, 96-Well Plate Separator,
Flask Separator, Multi-6
Microcentrifuge, Tube Separator, Solo-Sep Microcentrifuge Tube Separator,
96-well Plate Side Pull Magnetic Separator, Multi-32 Microcentrifuge Tube
Separator, MultiSep Magnetic Separator, Neodymium Iron Magnet Unit), BioMag
Nucleic Acid Kits & Particles (BioMag Oligo
(dT)20 Particles, SelectaPure
mRNA System
BioMag Secondary Antibodies
Goat Anti-Human IgM, Goat Anti-Rat IgM, Goat Anti-Human
IgG Secondary Antibodies, Goat Anti-Human IgG, Fc Specific, Secondary
Antibodies, Goat Anti-Mouse IgG Secondary Antibodies, Goat Anti-Mouse
IgG, Fc Specific Secondary Antibodies, Goat Anti-Mouse IgM Secondary Antibodies,
Goat Anti-Rabbit IgG Secondary Antibodies, Goat Anti-Rat IgG Secondary
Antibodies, Goat Anti-Rat IgG, Fc Specific Secondary Antibodies
BioMag SelectaPure Anti-Human Leukocyte Particles
(Anti-Human CD11b, Anti-Human CD14, Anti-Human CD16, Anti-Human CD19,
Anti-Human CD2, Anti-Human CD3, Anti-Human CD34, Anti-Human CD4, Anti-Human
CD45, Anti-Human CD56, Anti-Human CD71, Anti-Human CD8, CD4+ Enrichment
System, CD8+ Enrichment System, T-Cell Enrichment System)
BioMag SelectaPure Anti-Mouse Leukocyte Antibodies
Anti-Mouse CD4, Anti-Mouse CD45r, Anti-Mouse CD8a
BioMag Sheep Anti-Fluorescein
BioMag Superparamagnetic Iron Oxide
BioMag T-Cell Enrichment Systems CD4+
Enrichment System, CD8+ Enrichment System, T-Cell Enrichment System
BioMag Unconjugated Particles
Amine, Carboxyl, Maxi Amine, Maxi Carboxyl
Dyed Microspheres
Flow Cytometry Particles
Acridine Orange Reference Standard, Allophy cocyanine
Reference Standar, Autofluor™ Reference Standard, Certified Blank™ (no
label) Reference Standard, Cy5 Reference Standard, Dansyl Chloride Reference
Standard, DAPI Reference Standard, FITC/PE Compensation Standard, Flow
Check Ruby Red Fluorescent Microspheres, Flow Check® BB/Green Compensation
Kit, Flow Check® Maxi-Brite Color Compensation Set, Flow Check® High Intensity
Alignment Grade Particles - 0.50µm (BB/YG)/ 1.00µm (YG)/ 6.00µm (YG),
Flow Check® Rhodamine High-Brite/Intensity set/ Low Brite/Med-Brite/Maxi
Brite, Flow Check® Sulforhodamine High-Brite/ Intensity set/ Low Brite/Med-Brite/Maxi
Brite, Flow Check® Undyed Particle, Flow Check® YG Size Range Calibration
Kit, Flow Cytometry Absolute Count Standard, Fluorescein 2µm Reference
Standard, Fluorescein Reference Standard, Full Spectrum, Fura 2 Reference
Standard, Hoechst 33342 Reference Standard, Indo 1 Reference Standard,
Oxazine 1 Reference Standard, PE-Cy5 Tandem Reference Standard, PE-TR
Tandem Reference Standard, PolyComp Beads Coated with Anti-IgG, Propidium
Iodide 2µm Reference Standard, Propidium Iodide Reference Standard, QC
Windows® (FITC/PE), QC Windows® (FITC/PE, Cy5/APC), QC Windows® (FITC/PE/PE-Cy5),
QC Windows® (FITC/PE/PE-TR), QC3™ (FITC/PE), QC3™ (FITC/PE, Cy5/APC),
QC3™ (FITC/PE/PE-Cy5), QC3™ (FITC/PE/PE-TR), Quantum™ APC MESF, Quantum™
Cy5 MESF, Quantum™ FITC MESF (high level), Quantum™ FITC MESF (high level)
premixed, Quantum™ FITC MESF (low level), Quantum™ FITC MESF (low level)
premixed, Quantum™ FITC MESF (medium level), Quantum™ FITC MESF (medium
level) premixed, Quantum™ PE-Cy5 MESF, Quantum™ R-PE MESF, Quantum™ Simply
Cellular® anti-Human IgG, Quantum™ Simply Cellular® anti-Mouse IgG, Quantum™
Size Calibration Standards, R-Phycoerythrin Reference Standard, Rhodamine
123 Reference Standard, Rhodamine B Reference Standard, Right Reference
Standard™ APC High/Low/Medium, Right Reference Standard™ Fluorescein High/Low/Medium,
Right Reference Standard™ PE-Cy5 High/Low/Medium, Right Reference Standard™
Phycoerythrin High/Low/Medium, Simply Cellular® anti-Human IgG, Simply
Cellular® anti-Mouse IgG, Simply Cellular® Compensation Standard, T.M.
Rhodamine Reference Standard, Texas Red Reference Standard, Ultra Rainbow
Fluorescent Particles ~10.2µm/~3.8µm)Fluoresbrite® Fluorescent Microspheres
(Bright Blue (BB) Carboxylate Microspheres, Chemiluminescent Microspheres,
Microsphere Kits, Multifluorescent Microspheres, Polychromatic Microspheres,
PolyFluor™ Microspheres, Yellow Green (YG) Microspheres, YG Carboxylate
Microspheres, FluoresbriteYellow Orange (YO) Carboxylate Microspheres,
Fluorescent Antibody Capture and Protein Conjugation Particles
Functionalized Microspheres
Polybead Amino Microspheres, Polybead Carboxy-Sulfate
Microspheres, Polybead Carboxylate Microspheres, Polybead Hydroxylate
Microspheres, Polybead Sulfate Microspheres
Inorganic Particles
Microsphere Sampler Kits
Natural Biological Products
PolyBalls
Polybead Polystyrene Microspheres
Polystyrene Beads, Large
Precision Size Standards
NIST Traceable Particle Size Standard
Protein Bound Microspheres
Goat anti-Mouse lgG (H&L) Blue Dyed Microspheres,
Goat anti-Mouse lgG (H&L) Fluoresbrite® YG Microspheres, Goat anti-Mouse
lgG (H&L) Microspheres, Goat anti-Rabbit lgG (H&L) Blue Dyed Microspheres,
Goat anti-Rabbit lgG (H&L) Fluoresbrite® YG Microspheres, Goat anti-Rabbit
lgG (H&L) Microspheres, Protein A - Polystyrene Paramagnetic 1-2µm, Protein
A Blue Dyed Microspheres, Protein A Fluoresbrite® YG Microspheres, Protein
A Microspheres, Protein G Blue Dyed Microspheres, Protein G Fluoresbrite®
YG Microspheres, Protein G Microspheres etc)
Protein Coupling Kits & Reagents
Streptavidin & Biotin Coated Microspheres
Superparamagnetic Particles & Kits
Polymers & Monomers
Ion Exchange Resins
Amberlite® 200, Amberlite® IR-120, Amberlite® IR-120
Plus, Amberlite® IR-122, Amberlite® IRA-458, Amberlite® IRA-900, Amberlite®
IRA-93, Amberlite® IRA-958, De-Hibit 200, TMD-8.
Monomers
Acid Functionalized, Acrylamide and (Meth)acrylamide,
Amine Functionalized, Crosslinking & Post-Crosslinking Agents, Halogen-containing,
High Refractive Index, Hydrophilic, Miscellaneous, PhotoActive, Reactive,
Styrene, UV Aborsober etc.
PM - Adjuncts
1-(2-Trimethyl siloxy ethoxy)-1-trimethylsiloxy-2-methylpropene,
2-Hydroxy-2-methyl-1-phenyl-1-propanone, 2-Hydroxy-4-n-octoxybenzophenone,
2-iso-Propylthioxanthone 97%, 3-Amino propyl trieth oxysilane, 4,4'-Difluoro
benzo phenone, 4,4'-Dihydroxybenzophenone, 4'4-Bis(dimethylamino)benzophenone,
Acrylic cement, MC-Bond, Alumina, activated powder, Cellulose, carboxymethyl
ether (Selectacel™ CM), Cellulose, diethyl aminoethyl (Selectacel™ DEAE),
Cellulose, diethylaminoethyl (Selectacel™ DEAE), Cellulose, epichlorohydrin/triethanolamine
(Selectacel™ ECTEOLA), Cellulose, phosphate (Selectacel™ phosphate), Cellulose,
phosphate (Selectace phosphate), Cellulose, phosphate (Selectacel® phosphate,
standard), Cellulose, quaternary aminoethyl (Selectacel™ QAE), Di-(2-ethylhexyl)
phthalate, Diphenyl adipate, Inhibitor Removal Column, N,N-Bis(2-hydroxyethyl)-4-toluidine,
Octenylsuccinic anhydride etc.
PM - Miscellaneous
DisperseEZ-200W1, DispersEZ-200W2, DispersEZ-300,
Microdispers & DispersEZ PTFE, Particles, Microdispers-200, Microdispers-3000,
Microdispers-5000, Microdispers-8000.
Polymer Individual Standards
Block Copolymers (Standards), Polybutadiene, Dextran,
Poly(2-vinylpyridine), Poly(acrylic acid), sodium salt, Poly(alpha-methacrylate),
Poly(ethylene glycol), Poly(isoprene-1,4), Poly(methacrylic acid), Poly(methyl
methacrylate), Poly(styrenesulfonic acid), Poly(tert-butyl methacrylate),
Polyacrylamide, Polyethylene, Polypropylene, Polystyrene.
Polymers
Biodegradable Polymers (Poly(Lactic Acid) Based
Biomaterials, PEG(1000)-b-PLA(5000), Diblock Polymer,
PEG(1000)-b-PLA(750), Diblock Polymer,
PEG(350)-b- PLA(300), Diblock Polymer,
PEG(5000)-b-PLA(1000), Diblock Polymer,
PEG(5000)-b-PLA(5000), Diblock Polymer,
PLA(1000)-b-PEG(10,000)-b-PLA(1000), Triblock Polymer,
PLA(1000)-b-PEG(1000)-b-PLA(1000), Triblock Polymer,
PLA(1000)-b-PEG(4000)-b-PLA(1000), Triblock Polymer,
PLA(2000)-b-PEG(1000)-b-PLA(2000), Triblock Polymer,
PLA(5000)-b-PEG(1000)-b-PLA(5000), Triblock Polymer)
Block Copolymers (2-(2'-Methacryloxy-5'-
methylphenyl)benzotriazole, Poly(dimethyl siloxane-b-ethylene oxide),
methyl terminated, Poly(dimethylsiloxane-b-ethylene oxide), methyl terminated,
Poly(n-butyl methacrylate-b-methyl methacrylate), Poly(styrene-b-isoprene-b-styrene))
Fluorosurfactants(New Environmentally Friendly Fluorosurfactants, PolyFox™
AT-1101, PolyFox™ AT-1105, PolyFox™ PF-136A, PolyFox™ PF-154N, PolyFox™
PF-3320, PolyFox™ PF-6320, PolyFox™ PF-6520), Miscellaneous Polymers (New
Cyclic Olefin Copolymers (Ethylene-Norbornene), beta-Cyclodextrin, Cyclic
Olefin Copolymer, Dibutyl phthalate, Dibutyltin maleate, DisperseEZ-200W1/200W2/300,
Microdispers & DispersEZ PTFE Particles, Microdispers-200/3000/5000/8000,
Poly ether ether ketone (PEEK), Poly(1,4-butanediol adipate), Poly(2,6-dimethyl-1,4-phenylene
oxide), Poly(4-hydroxybenzoic acid), Poly(ethylene /vinyl acetate), Poly(furfuryl
alcohol), Poly(hexamethyleneadipamide), Poly(hexamethylenesebacamide),
Poly(l-alanine), Poly(Methacrylonitrile), Poly(propylene glycol) (400)
dimethacrylate, Poly(propylene glycol) [MW 4,000/400], Poly(styrene /acrylonitrile)
75:25, Poly(styrene /butadiene) 85:15, Poly(tetra methylene ether glycol)
(Polytetra hydrofuran), Poly(vinyl butyral) [MW 100,000-150,000/ MW 70,000-100,000],
Poly[methylene(polyphenyl) isocyanate], Polyacetal resin, Polyacrylonitrile,
Polybutadiene [MW 1,600/3,000/400,000], Polyetherimide, Polyisobutylene
[MW 1,350/500], Polypropylene, Chromatographic Grade, Polypropylene, sotactic,
Polysulfone (dihydroxy terminated), Styrene, Vinyltriethoxysilane), Natural
Polymers (Guar Gum, Poly(l-lactic acid) [MW ~700,000], Pullulan, desalinized),
Acid Functionalized & Salts (Chitosan, Poly(4-vinylpyridine), Poly(4-vinylpyridine),
Poly(acrylic acid) [MW ~ 1,000,000 ], Poly(acrylic acid) [MW ~ 50,000],
Poly(butadiene/acrylonitrile) 67:33, Poly(ethyl acrylate/acrylic acid),
Poly(ethyl acrylate/acrylic acid) [50:50], Poly(meth acrylic acid), Poly(methyl
meth acrylate/ methacrylic acid), Poly(methyl metha crylate/ methacrylic
acid) [75:25], Poly(methyl methacrylate/methacrylic acid) [90:10], Poly(n-butyl
acrylate/acrylic acid), Poly(n-butyl acrylate/acrylic acid) [50:50], Poly(n-butyl
acrylate/acrylic acid) [90:10], Poly(styrenesulfonic acid, sodium salt)
Kit, Poly(styrenesulfonic acid/maleic acid), sodium salt, Poly(styrenesulfonic
acid/maleic acid), sodium salt, Poly(vinyl chloride/vinyl acetate/maleic
acid) 86:13:1, |
Starch, poly(acrylamide/acrylic acid) graft, acid
sodium salt),Acrylate & Methacrylate(2-(N,N-Diethylamino)ethyl methacrylate
,2-n-Butoxyethyl methacrylate, ~99%, iso-Butyl methacrylate, n-Butyl methacrylate,
n-Dodecyl acrylate, n-Dodecyl methacrylate, n-Hexyl acrylate, min. 98%,
Poly(2-hydroxyethyl methacrylate) [12% soln. in ethanol], Poly(2-hydroxyethyl
methacrylate) [powder], Poly(2-hydroxyethyl methacrylate/ methacrylic
acid) 90:10, Poly(2-hydroxypropyl methacrylate), Poly(benzyl methacrylate),
Poly(ethyl acrylate), Poly(glycidyl methacrylate), 10% solution in MEK,
Poly(iso-butyl acrylate), 20% soln. in toluene, Poly(iso-butyl methacrylate)
fine powder, [?] = 0.60, Poly(iso-propyl methacrylate), Poly(lauryl acrylate),
20% soln. in toluene, Poly(lead methacrylate 2-ethylhexanoate/methyl methacrylate)
83:17 (by wt.), Poly(methyl methacrylate) [MW 100,000], Poly(methyl methacrylate)
[MW 25,000], Poly(methyl methacrylate) [MW 350,000], Poly(methyl methacrylate)
[MW 75,000], Poly(methyl methacrylate /methacrylic acid) [80:20], Poly(methyl
methacrylate/n-butyl methacrylate), Poly(n-amyl methacrylate), Poly(n-butyl
acrylate), 20% soln. in toluene, Poly(n-decyl acrylate), 20% soln. in
toluene, Poly(n-propyl acrylate), 25% soln. in toluene, Poly(octadecyl
methacrylate), ~40% soln. in toluene, Poly(tert-butyl acrylate), 35% soln.
in toluene, Poly(tert-butyl methacrylate), sec-Butyl methacrylate, Stearyl
acrylate, Stearyl methacrylate, tert-Amyl methacrylate, tert-Butyl methacrylate),
Amine Functionalized (2-(N,N-Diethylamino)ethyl methacrylate, 2-(N,N-Dimethylamino)ethyl
acrylate, 2-(tert-Butylamino)ethyl methacrylate, min. 90%, 2-Acryloxyethyltrimethylammonium
chloride, 2-Methacryloxyethyltrimethylammonium chloride, 70% soln. in
water, 4,4'-Diamino-3,3'-dinitrodiphenyl ether, 4-Vinylpyridine, Chitin,
practical, Chitosan, Diallyl dimethyl ammonium chloride, 65% soln. in
water, Methacryloylcholine methyl sulfate, 40% soln. in water, N-Dodecyl
methacryl amide, Poly(2-dimethyl aminoethyl methacrylate), 20% soln. in
tert-butanol, Poly(2-hydroxy-3-methacryloxy propyl trimethylammonium chloride),
10% soln.in water, Poly(2-methacryloxy ethyltrimethyl ammonium bromide),
20% soln. in water, Poly(2-methacryloxyethyltrimethylammonium bromide),
20% soln. in water, Poly(2-vinyl-1-methylpyridinium bromide), Poly(3-chloro-2-hydroxypropyl-2-methacryl
oxyethyl dimethyl ammonium chloride), Poly(4-aminostyrene), Poly(4-vinyl-1-methylpyridinium
bromide), Poly(allylamine hydrochloride), Poly(diallyldi methylammonium
chloride), Poly(diallyl dimethyl ammonium chloride), Poly(l-lysine hydrobromide),
Poly(N-methylvinylamine), Poly(N-vinylpyrrolidone/2-dimethylaminoethyl
methacrylate), dimethyl sulfatequaternary, Polyethylenimine, branched
(30% soln. in water, MW 10,000), Polyethylenimine, branched (30% soln.
in water, MW 70,000), Polyethylenimine, branched (99%), Polyethylenimine,
branched (MW 10,000), Polyethylenimine, branched, benzylated, Polyethylenimine,
branched, permethylated, permethobromide, Polyethylenimine, Linear, MW
2,500/MW 25,000/MW 250,000), Biodegradeable (Poly(Lactic Acid) Based Biomaterials,
Biodegradable Polymers Kit, Glycolide, PEG(1000/1000/350/5000) -b-PLA
(5000/ 750 / 300/ 1000/ 5000), Diblock Polymer, PHB-b-PEG (1000/350 &
1000/750), PLA-b-PEG-b-PLA, Triblock Polymer, Poly(dl-lactic acid) - MW
~20,000-30,000/Mw ~6,000-16,000, Poly(dl-lactic acid) i.v. 2.0 -2.8dl/g,
Poly(dl-lactide/glycolide) [50:50]/[70:30]/[75:25]/ [80:20]/ [85:15]/
[90:10], Poly(glycolic acid) [i.v. 1.0-2.0], Poly(l-lactic acid) [MW ~1,600-2,400],
Poly(l-lactic acid) [MW ~325,000 - 460,000], Poly(l-lactic acid) [MW ~40,000
- 70,000], Poly(l-lactic acid) [MW ~80,000 - 100,000], Poly(l-lactic acid)
Molecular Weight Kit, Poly(l-lactide/ glycolide) [70:30], Poly(l-lactide/
glycolide) [70:30], Poly[(-)3-hydroxybutyric acid], Poly[(R)-3-hydroxybutyrate],
MW ~10,000 /MW ~1000/MW ~2000/MW ~3000/ MW ~500/MW ~5000, Polycaprolactam
(MW 16,000)/(MW 35,000), Polycaprolactone, Polycaprolactone diol (MW 1,250)/(MW
2,000)), Conductive(1H,1H,2H,2H-Hepta decafluorodecyl acrylate, 1H,1H,2H,2H-Heptadecafluorodecyl
methacrylate, 1H,1H,3H-Hexafluorobutyl acrylate, 1H,1H,3H-Hexafluorobutyl
methacrylate, 1H,1H,7H-Dodecafluoroheptyl, methacrylate, 2,2,2-Trifluoroethyl
acrylate, 2,2,2-Trifluoroethyl methacrylate, 2-Bromoethyl acrylate, 2-Chloroacrylonitrile,
3-Chlorostyrene, 4-Chlorophenyl acrylate, Hexafluoro-iso-propyl methacrylate,
Methacryloyl fluoride, Pentabromophenyl acrylate, Pentabromophenyl methacrylate,
Pentafluorophenyl acrylate, Penta fluorophenyl methacrylate, Poly(3,4-ethylene
dioxythiophene) /poly(styrenesulfonate), Poly(3-methylthiophene), Poly(3-octyl
thiophene), Polyaniline, Emeraldine form (Acid doped), Polyaniline, Emeraldine
form (undoped), Polypyrrole, Tribromoneopentyl methacrylate, Trichloroacrylic
acid etc), Crosslinkers (2-Methylene-1,3-dioxepane, Poly(propylene glycol)
(600) diglycidyl ether, Poly(styrene/divinyl benzene), Poly(styrene/ divinyl
benzene), Poly(styrene/methyl methacrylate)), Halogen-containing (1,1,1-Trimethylolpropane
monoallyl ether, 2-(2-Ethoxyethoxy)ethyl acrylate, 2-Hydroxyethyl methacrylate,
2-Methoxyethyl acrylate, 2-Methoxyethyl methacrylate, 3-Sulfopropyl acrylate,
potassium salt, 3-Sulfopropyl methacrylate , potassium salt, 3-Sulfopro
pyldimethyl-3-methacryl amidopropyl ammonium, inner salt, Dextran, hydrogenated,
Diethylene glycol diacrylate, Diethylene glycol dimethacrylate, Diethylene
glyco divinyl ether, Glycerol monomethacrylate, mixture of isomers, Hydroxypropyl
methacrylate, mixture of isomers, Lithium methacrylate, N-iso-Propylacrylamide,
N-Vinyl-2-pyrrolidone, Poly(2-chloro-1,3-butadiene), Poly(4-bromostyrene),
Poly(4-chlorostyrene), Poly(4-vinylphenol) brominated, Poly(chlorotri
fluroethylene), Poly(styrenesulfonyl fluoride), Poly(tetrafluoroethylene),
Poly(vinyl chloride), Poly(vinylidene chloride/acrylonitrile) 80:20, Poly(vinylidene
fluoride), Polyethylene, chlorinated, 25% Cl, Triethylene glycol monomethyl
ether monomethacrylate, Vinyl methyl sulfone), Hydrophobic (n-Butyl methacrylate,
N-Dodecylmethacrylamide, n-Hexyl acrylate, N-tert-Octylacrylamide, Poly(dimethylsiloxane),
methyl terminated, Poly(n-butyl methacrylate), Poly(n-butyl methacrylate),
Polyethylene, Polypropylene, Polypropylene, Chromatographic Grade, Vinyl
butyrate, Vinyl stearate), Liquid Crystal (Poly(4-vinylphenol), Poly(gamma-benzyl
l-glutamate), Poly(hexyl isocyanate)), Poly(ethylene glycol) (Poly(ethylene
glycol) bis (2-aminoethyl), Diethylene glycol distearate (DGD), Poly(ethylene
glycol terephthalate), Poly(ethylene glycol) [MW 400], Poly(ethylene glycol)
(200) adipate, Poly(ethylene glycol) (200) mono-stearate, Poly(ethylene
glycol) (750) monocarboxy methyl ether monomethyl ether, Poly(ethylene
glycol) (n) diacrylate, Poly(ethylene glycol) (n) diglycidyl ether, Poly(ethylene
glycol) (n) dimethacrylate, Poly(ethylene glycol) (n) dimethyl ether,
Poly(ethylene glycol) (n) distearate, Poly(ethylene glycol) (n) monomethacrylate,
Poly(ethylene glycol) (n) monomethyl ether monomethacrylate, Poly(ethylene
glycol) (n) monomethyl ether, mono(succinimidyl succinate) ester, Poly(ethylene
glycol) [MW 1,000]/[MW 1,450; waxy solid]/[MW 1,540]/ [MW 10,000]/ [MW
20,000]/ [MW 200]/ [MW 3,400; waxy solid]/ [MW 3,400]/ [MW 300]/ [MW 600]/
[MW 7,500]/ [ MW 8000], Poly(ethylene glycol) monomethyl ether, Poly(ethylene
glycol)-bisphenol A diglycidyl ether adduct, Poly(propylene glycol) (300)
monomethacrylate, Poly(tetramethylene ether glycol) (Polytetrahydrofuran)),
PhotoActive (2,4,6-Trimethyl benzoyl diphenylphosphine oxide, N-Vinylcarbazole,
Poly(N-vinylcarbazole), Poly(vinyl alcohol), N-methyl-4(4'-formylstyryl)pyridinium
metho sulfate acetal, Poly(vinyl cinnamate)), Reactive (Poly(2-hydroxyethyl
methacrylate) [12% soln. in ethanol], Poly(4-vinylphenol) [MW 22,000],
Poly(4-vinylphenol) [MW 9,000 - 11,000], Poly(acrylonitrile /butadiene/s
tyrene) powder, Poly(acryloyl chloride), Poly(butadiene/maleic anhydride)
1:1 (molar), Poly(ethylene glycol) monomethyl ether, Poly(ethylene/maleic
anhydride) 1:1 (molar), Poly(maleic anhydride 1-octadecene) 1:1 (molar),
Poly(maleic anhydride), Poly(metha cryloyl chloride), Poly(propylene oxide),
cyclocarbonate terminated, Poly(styrene/ maleic anhydride) [67:33], Poly(styrene
/maleic anhydride) [75:25], Poly(styrene/ maleic anhydride) [9011-13-6],
Poly(vinyl methyl ketone), Poly(vinylferrocene), Polyacrolein), Styrene
(4-(tert-Butyl)styrene, Poly(4-iodostyrene/styrene/divinylbenzene ~58:40:2,
Poly(4-methylstyrene/styrene) 90:10, Poly(alpha-methylstyrene), Polystyrene
(MW 50,000), Polystyrene (MW 800 - 5,000), Polystyrene, brominated), Water
Insoluble (Cellulose, carboxymethyl ether, sodium salt, Cellulose, cyanoethyl
ether, Poly(2-hydroxyethyl methacrylate) [powder], Polystyrene, atactic
beads), Water Soluble (Poly(acrylamide/acrylic acid), potassium salt,
crosslinked, Poly(acrylic acid), sodium salt, crosslinked, 2,4,6-Tribromo
phenyl acrylate, Cellulose, carboxymethyl ether, sodium salt (MW 700,000),
Cellulose, carboxymethyl ether, sodium salt (MW 80,000), Cellulose, ethyl
ether, Cellulose, ethyl ether, Cellulose, ethyl hydroxyethyl ether, Cellulose,
hydroxyethyl ether (MW >100,000), Cellulose, hydroxyethyl ether (MW 1,000,000),
Cellulose, hydroxyethyl ether (MW 720,000), Cellulose, methyl hydroxyethyl
ether, Dextran, Dextran (MW 100,000-200,000), Dextran (MW 3,000,000-7,000,000),
Dextran [MW 200,000-300,000], Dextran sulfate, sodium salt. Dextran, DEAE
ether, Dextran, FITC, Poly(1-glycerol methacrylate), Poly(2-ethyl-2-oxazoline),
Poly(2-ethyl-2-oxazoline) [MW 50,000], Poly(2-ethyl-2-oxazoline) [MW 500,000],
Poly(2-hydroxyethyl methacrylate/ methacrylic acid) 90:10, Poly(2-hydroxy
propyl methacrylate), Poly(2-vinylpyridine N-oxide), Poly(2-vinylpyridine)
[MW 200,000-400,000], Poly(2-vinylpyridine) [MW 300,000-400,000], Poly(2-vinylpyridine)
[MW 40,000], Poly(4-vinylpyridine N-oxide), Poly(acrylamide/ 2-methacryloxy
ethyl trimethyl ammonium bromide) 80:20,20% soln. in water, Poly(acrylamide/
acrylic acid), Poly(acrylamide/acrylic acid), Poly(acrylamide/ acrylic
acid) [60:40], Poly(acrylic acid) ammonium salt, powder, Poly(acrylic
acid) sodium salt, Poly(acrylic acid) sodium salt (MW ~ 2,000), Poly(acrylic
acid) sodium salt (MW ~ 6,000), Poly(acrylic acid) sodium salt [MW ~ 225,000],
Poly(acrylic acid) sodium salt [MW ~ 3,000], Poly(acrylic acid) sodium
salt [MW ~ 60,000], Poly(acrylic acid), 25% soln. in water, Poly(acrylic
acid), 50% soln. in water, Poly(acrylic acid), 63% soln. in water, Poly(acrylic
acid), powder, Poly(acrylic acid), powder, Poly(butadiene/maleic acid)
1:1 (molar), 42% soln. in water, Poly(ethylene glycol) a-2-aminoethyl,
?-methoxy, Poly(ethylene glycol) monomethyl ether [MW 350], Poly(ethylene
glycol) monomethyl ether [MW 1,900], Poly(ethylene oxide) [MW 1,000,000],
Poly(ethylene oxide) [MW 100,000], Poly(ethylene oxide) [MW 200,000],
Poly(ethylene oxide) [MW 300,000], Poly(ethylene oxide) [MW 4,000,000],
Poly(ethylene oxide) [MW 5,000,000], Poly(ethylene oxide) [MW 600,000],
Poly(ethylene oxide) [MW 8,000,000], Poly(ethylene oxide-b-propylene oxide),
Poly(ethylene oxide-b-propylene oxide) [ratio 0.15:1], Poly(ethylene oxide-b-propylene
oxide) [ratio 0.33:1], Poly(ethylene oxide-b-propylene oxide) [ratio 0.8:1],
Poly(ethylene oxide-b-propylene oxide) [ratio 3:1], Poly(ethylene/acrylic
acid) 92:8, Poly(l-lysine hydrobromide), Poly(l-lysine hydrobromide) [MW
40,000-60,000], Poly(maleic acid), 50% soln. in water, Poly(methacrylic
acid) ammonium salt, 30% soln. in water, Poly(methacrylic acid) sodium
salt, 30% soln. in water, Poly(n-butyl acrylate/2-methacryl oxyethyl trimethyl
ammonium bromide) 80:20, 20% soln. in water, Poly(N-iso-propylacrylamide),
Poly(N-vinylpyrrolidone) - [MW 1,000,000], Poly(N-vinylpyrrolidone) -
[MW 10,000], Poly(N-vinylpyrrolidone) - [MW 2,500], Poly(N-vinylpyrrolidone)
- [MW 4,000 - 6,000], Poly(N-vinylpyrrolidone) - [MW 40,000], Poly(N-vinylpyrrolidone)
- pharmaceutical grade, Poly(N-vinylpyrrolidone/vinyl acetate) [30:70],
Poly(N-vinylpyrrolidone/vinyl acetate) [50:50], Poly(N-vinylpyr rolidone/vinyl
acetate) [70:30], Poly(styrene sulfonic acid), 30% soln. in water)
Organic Intermediates
2,5 Dibromofuran, 2,5-Diethyltetrahydrofuran,
2,5-Dimethylfuran, 2-Acetyl Furan, 2-Bromo Furan,
2-Butanoyl Furan, 2-Butyl Furan, 2-Furaldehyde,
2-Furfuryl Acetate, 2-Furfuryl Alcohol, 2-Furfuryl Amine, 2-Furoic Acid,
2-Furonitrile, 2-Heptyl Furan, 2-Methyl Furan, 2-Methyl Furoate, 2-Methyl
Tetrahydrofuran, 2-Methyl Tetrahydrofuroate, 2-Methyl-5-Acetyl Furan,
2-Methyl-5-Butanoyl Furan, 2-Methyl-5-Pentanoyl Furan, 2-Pentyl Furan,
2-Tetrahydrofurfuryl Acetate, 2-Tetrahydrofurfuryl Amine, 2-Tetrahydrofurfuryl
Benzoate, 2-Tetrahydrofurfuryl Butyrate, 2-Tetrahydrofurfuryl Propionate,
2-Tetrahydrofuroic Acid, 3 Furan Boronic Acid, 3-Bromo Furan, 3-Furaldehyde,
3-Furoic Acid, 3-Furonitrile, Bis-(hydroxymethyl) Furan, Difuryl Propane,
Dimethyl 3,4-Furan Dicarboxylate, Ditetrahydrofuryl Propane, Ethyl 2-Furoate,
Ethyl Furfuryl Ether, Furan, Furan-3,4-Dicarboxylic Acid, Methyl-2-Bromofuran-carboxylate,
Tetrahydrofuran, Tetrahydrofurfuryl Alcohol. |
Histology & Microscopy
Certified Stains and Dyes
Acid red 1, Acridine yellow G, Aniline blue, Biebrich
scarlet, Carmine, Chlorazole black E, Cibacron blue F3GA, Congo red, Coomassie®
Blue G250, Cresyl violet acetate, Direct red 81, Eosin Y, Fast green FCF,
Fluorescein isothiocyanate, Fuchsin, basic, Gallamine blue, Hematein,
Light green SF yellowish, Metanil yellow, Methyl green, Nuclear fast red,
Oil red, Orange G, Pyronin Y, Safranin O, Sirius red, Tetrachrome stain,
Thionin, Toluidine blue O, Trypan blue, Wright stain, Clearing & Dehydration
Reagents, (ParaClear Odorless Xylene Substitute, Acetone, Ethyl alcohol
(100%), Methyl salicylate, Poly/Clear Solvent, Tannic acid, Xylene), Decalcifying
Products (Poly-NoCal, Poly-NoCal & Fixative, Poly-NoCal End Point Determination
Kit), Electron Microscopy (EM) Reagents (Embed-It™ Low Viscosity Epoxy
Kit, Acetone, Chloroauric acid, Cobalt (II) chloride, Colchicine, Formvar
15/95 (Poly[vinyl formal]), Lead (II) Nitrate, Lead Citrate Trihydrate,
Neutral red, Nitroblue tetrazolium chloride (NBT), Nonenyl Succinic Anhydride
(NSA), Phosphomolybdic acid, Phosphotunstic Acid hydrate, Procion blue
MX-R, Pyroxylin, 23% solids solution in ethyl acetate, Ruthenium hexammine
trichloride, Spurr Low Viscosity Embedding Kit, Spurr Low Viscosity Mini
Kit, Uranyl Acetate 98%)Embedding / Paraffins (GemCut™ Amethyst Paraffin,
GemCut™ Aquamarine Paraffin, GemCut™ Citrine Paraffin, GemCut™ Emerald
Paraffin, GemCut™ Opal Paraffin, GemCut™ Pink Sapphire Paraffin, Soft
Block, Embedding Mold Release Spray, GemCut™ Paraffin, Gold Standard Peel-A-Way®
Micro-Cut Paraffins 52°C to 54°C / 56°C to 58°C/ 62°C to 64°C, Peel-A-Way®
Micro-Cut Preferred (DMF) Paraffin 52°C to 54°C/ 56°C to 58°C/ 62°C to
64°C, PolyFin® Paraffin, PolyGuard paraffin repellent)
Embedding Molds
Embedding Mold Release Spray, Embedding Molds -
BEEM, Embedding Molds - Capsule, Embedding Molds - Chien, Embedding Molds
- Histology Resin Embedding, Embedding Molds - Identification Tabs, Embedding
Molds - Multispecimens, Flat, Embedding Molds - Peel-A-Way Molds, Embedding
Molds - Polyetheylene Molding Trays for Resins, Embedding Molds - Polyethylene,
Light Microscopy, Embedding Molds - Silicone, Tissue Cassettes.
Fixative Reagents
Acrolein, Additional Fixative Reagents 2,4,6-sym-Collidine
buffer kit, Acetone, EM grade, Acetone, Hartman's Fixative, Hollandes
Fixative, Methanol (Methyl alcohol), Michel's Fixative), Bouin's Fixative,
Formaldehyde, Glutaraldehyde, Histocon, Karnovsky, Osmium tetroxide, Poly
LEM, PolyTransport Buffer, Ruthenium tetroxide, Zinc Formalin
Grossing and Frozen Section Products
Cryostat Blade Holders, Fast FNA / H. Pylori Stain
Kit, Fast Frozen Stain Kit, Poly-NoCal Decalcifying Products, Terry's
Polychrome Methylene Blue, Tissue Freezing Medium, PolyFreeze, Tissue
Marking Dye, Tissue-Tack Adhesive.
Ilford & Photographic Products Ilford
emulsions - G5 / K2 / K5 / K5D / L4, Ilford Nuclear Research Plates, Ilford
Safelight Filters, Dark Brown 904 / 902, Kodak Electron Image Film SO163,
3Ľ"x 4", Kodak Electron Microscopy Film 4489, 6.5cm x 9cm, PROMASTER®
Lens Cleaning Pen, PROMASTER® MicroClean Cleaning Cloth, Stabilizer For
B & W Film Stabilization, Universal fixer, Universal stop bath.
Immunohistochemistry & In Situ Antibodies
- IHC
Anti-Albumin (bovine serum) in rabbit, IgG fraction,
Anti-Albumin (human serum) in rabbit, IgG fraction, Anti-Alkaline phosphatase
(E. coli) in rabbit, IgG fraction, Anti-apoLipoprotein B in goat, Anti-apoLipoprotein
J in goat, Anti-Avidin (egg white) in rabbit, IgG fraction, lyophilized,
Anti-Beta galactosidase (E. coli) in rabbit, IgG fraction, Anti-Biotin
in rabbit, IgG fraction, lyophilized, Anti-Caspase-1 (Human) (ICEcaspase-1),
Anti-CD3 (Human), Anti-CD4 (Human), Anti-CD8 (Human), Anti-Collagen I
in rabbit, Anti-Collagen II in rabbit, Anti-Collagen III in rabbit, Anti-Collagen
V in rabbit, Anti-Fructose-6-phosphate kinase (rabbit muscle) in goat,
IgG fraction, Anti-Human Neuron specific enolase (NSE) in rabbit, serum,
lyophilized, Anti-IL-1ß (Human), Anti-Interferon ß (Human), Anti-Lactate
dehydrogenase (rabbit muscle) in goat, IgG fraction, Anti-Ovalbumin (egg
white) in rabbit, IgG fraction, Anti-rat Neuron specific enolase (NSE)
in rabbit, serum, lyophilized, Anti-Transferrin (human) in rabbit, IgG
fraction, Rabbit Anti-Green Fluorescent Protein Antibody).
Citrate Buffers
Citrate-Citric Acid Buffer, Phosphate-Citrate Buffer
Substrates
DAB (Diaminobenzidine tetrahydrochloride -Chromogen),
FITC (Fluorescein isothiocyanate-Chromogen), Hanker-Yates Reagent, L.A.B.
Solution, NBT (Chromogen), Peroxidase-anti-peroxidase (PAP) Rabbit, Propdium
Iodide (Counterstain), Streptavidin Reagents)
Mounting Media
Adhesive, Tissue-Tack, Aqua-Poly/Mount, Cedarwood
oil, CitraMount™ Medium, CMCP-10 High viscosity mountant, CMCP-9 Low viscosity
mountant, Immersion Oils - Fluorescent microscopy - Type DF, Immersion
Oils - Fluorescent microscopy - Type FF, Immersion Oils - Light microscopy
- Type A viscosity 150 centistokes, Immersion Oils - Light microscopy
- Type B viscosity 1250 centistokes, Immersion Oils - Light microscopy
- Type NVH viscosity 21000 centistokes, Mowiol 4-88®, Plastic Mount Mounting
Media, Poly-Mount, Poly-Mount Xylene, PolyGlass Coverslipping Medium.
Plastic Embedding Media & Kits Arladite
resins (modified epoxy resins), Batson's #17 Anatomical Corrosion Kit,
Embed-It Low Viscosity Epoxy Kit, Immuno-Bed Embedding Kits & Reagents,
JB-4 Embedding Embedding Kits & Reagents, JB-4 Plus Embedding Kit, Low
Viscosity Embedding Kits & Reagents, Lowicryl® Embedding Kits, Miscellaneous
Embedding Kits & Reagents, Nanoplast Embedding Kits, Osteo-Bed Bone Embedding
kit, Poly/Bed Embedding Kits & Reagents, Quetol 651 Embedding Kit, Unicryl
Resin Kit.
Processing
Alcohol, Bouin's Fixative, Cassettes, Formalin,
Hartman's Fixative, Hollandes Fixative, Poly/Clear Xylene Substitute,
Poly/LEM Fixative, Xylene, Zinc Formalin
Ready-to-Use Stains
2% Acridine Orange, Biebrich Scarlet - Acid Fuchsin
Solution, Fast Fine Needle Aspiration / Helicobacter Pylori Stain Kit,
Fast Frozen Stain Kit, Luxol Fast Blue, Metanil Yellow 0.25%, Poly G Blue,
Poly R Blue, Scott's Bluing Reagent
Special Stains
Coplin Jars, Fungi-Fluor Kit, Gomori's Trichrome
Stain Kit, Iron Stain Kit, MicroSilver Stain Kit (PCP) IVD, PAS Stain
Kit, PCP Control Slides, Peel-A-Way Microscope Slide Grip, Protargol S,
Rapid Mucin Stain Kit, TB Fluorostain Kit, Villanueva Bone Stain, Wright's
Giemsa Stain Solution.
Staining / Histology / Cytology Dyes and Stains
for Histology
Acid red 1, C.I. 18050, Biebrich Scarlet - Acid
Fuchsin Solution, Chlorophenol red, Cuprolinic blue (Quinolinic phthalocyanine),
DAB-4HCL (3-3'-Diaminobenzidine tetrahydrochloride, immunochemical grade),
DAB-4HCL (3-3'-Diaminobenzidine tetrahydrochloride, immunochemical grade),
Eosin Y, 0.5% alcoholic solution, Eosin Y, 1% alcoholic solution, Fungi-Fluor®
Kit for Fungal Detection, Hanker-Yates reagent, Indocyanine green, Luxol
Fast Blue ARN (Solvent Blue 37), Luxol Fast Blue, May-Grünwald Stain,
Metanil Yellow 0.25%, Metanil yellow, C.I. 13065, Multiple Stain Solution,
Orange G, C.I. 16230,, Protargol S, Ruthenium red, Scott's Bluing Reagent,
Silver Nitrate, Stains-all, Terry's polychrome methylene blue 2% aqueous,
Thionin, C.I. 52000, Villanueva, Osteochrome bone stain, Wright's Giemsa
stain solution
Hematoxylin & Eosin, Marking Dye for Tissue
(Black / Red / Blue / Green / Yellow)
Scott's Bluing Reagent, Stain Kits
Fungi-Fluor ® Pneumocystis Kit, Fungi-Fluor® Kit
for Fungal Detection, Fungi-Fluor® Pneumocystis Kit, GlycoGel Stain Kit,
Gomori's Trichrome Stain Kit, MicroSilver Staining Kit, Periodic Acid
Schiff's Stain, Prussian Blue Reaction for the Demonstration of Iron,
Rapid Mucin Stain Kit, Silver Enhancement Kit for LM, TB Fluorostain™
Kit
Stains-All, Wright Stain
Tissue Freezing Media
Molecular Biology
2% Acridine Orange, 2',7'-Dichlorofluorescein, 4',6-Diamidino-2-phenylindole
dihydrochloride (DAPI), 5-Bromo-4-chloro-3-indolyl ß-D-galactopyranoside,
Acridine mutagen ICR 191, Bisbenzimide (Hoechst 33258), Bisbenzimide (Hoechst
33342), Calcein, 2,4-Bis(N,N'-di[carboxymethyl]aminomethyl) fluorescein,
Cibacron blue F3GA, Coumarin 1, Coumarin 6, laser grade, Cyanoditolyl
Tetrazolium Chloride (CTC), DAB-4HCL (3-3'-Diaminobenzidine tetrahydrochloride,
immunochemical grade), Ethidium bromide,Fast Blue, Filipin (from Streptomyces
filipinensis), Fluorescein diacetate, Fluorescein isothiocyanate, Certified,
FITC, Hydroethidine™ (Dihydroethidium bromide), Lissamine Rhodamine B
sulfonyl chloride, Methylene blue chloride, C.I. 52015, certified, Osmium
ammine-B, Propidium iodide, Pyronin Y, C.I. 45005, certified, Rhodamine
B isothiocyanate, mixture of isomers, Toluidine blue O, C.I. 52040, certified,
Toluidine blue O, C.I. 52040, purified, XTT.
Protein Stablizers (Prionex®)
MIcrobiology
Microbiology Dyes and Stains
0.4% Safranin, Acridine yellow G, C.I. 46025, Auramine
O, Basic violet 3, C.I. 42555, certified, Crystal Violet, Fluorescein
diacetate, Gram's Decolorizer (75/25), Gram's Decolorizer (50/50), Gram's
Iodine, Gram's Iodine - Stabilized, Thiazole orange, Uvitex 2B, Wheatley's
Trichrome Blue, Wright stain, certifiedMicrobiology Stain KitsAcridine
mutagen ICR 191, AFB Auramine-Rhodamine Kit - Fluorescent, AFB Kinyoun
Kit, AFB Ziehl Neelson Kit, Cyanoditolyl Tetrazolium Chloride (CTC), Filipin
(from Streptomyces filipinensis), Fungi-Fluor® Kit for Fungal Detection,
Fungi-Fluor® Pneumocystis Kit, Fungi-White, Gomori's Trichrome Stain Kit,
Gram's Decolorizer (75/25), Gram's Decolorizer (50/50), Gram's Iodine,
Gram's Iodine - Stabilized, Gram's Stain Kit with Iodine, Gram's Stain
Kit with Stabilized Iodine, MicroSilver Staining Kit, Pneumocystis carinii
control slides, Szechrome NAS, Szechrome NIT, TB Fluorostain™ Kit.
Microloop® Calibration Gauge
for 1µl & 10µl
Microring® Bacterial Detectors
Microring® AC for identification of Anaerobic Cocci / Non-Sporing Anaerobes
/ Gardnerella vaginalis / Haemophilus species / clinically important yeasts
etc.
Parasitology Fixatives
Rapid Bacterial Test Strips
Copper PVA Fixative, PVA "Gold Standard" Fixative,
SAF Fixative, UNIFIX™, Wheatley's Trichrome Blue, Z-PVA® Fixative
TB Processing Reagents
NALC Powder, TB Base Digestant, TB Buffer
Transwabs
Transwab® with Plain Medium |
